Women's Alpine Boots

Last: 100 mm – An average last for most normal width and volume feet or slightly wider.

360˚ Custom Shell – Salomon's proven heat customization process lets you dial in the fit perfectly.

Flex: 90 – A medium stiff flex designed for intermediate to advanced women skiers.

My CustomFit 3D Performance Liner – Superior heel hold and new anti-packing foam.

Women's Liner – Specific volume and shape, with added warm comfy fur inside.

TwinFrame Technology – Salomon dials in just the right amount of rigidity where it's needed for performance and leaves the shell softer in other areas to enhance comfort and ease of entry.

Shell – Polyurethane

Cuff – Polyurethane

24mm Oversized Pivot – Reduced play for extreme precision and direct power transmission. Because many modern all mountain skis are wider, they require more torque to stay on edge. Oversized Pivot answers the need of wider skis.

4mm Integrated Lifter

4 Micro-Adjusting Aluminum 3D Buckles

35mm Velcro Power Strap

Heel & Toe Removable Sole Pads – Heel and toe pads can be replaced when worn out.

Last: 100 mm – An average width and volume last fits most feet.

Fast Fit Entry – Softer TPU designed into the instep area of the Powerlite shell for quick and easy entry and exit.

Navicular Punch – A strategic bump built into the boot mold to alleviate pressure commonly experienced during ankle flexion.

Asymmetrical Toe Box – Fits the natural curvature of your toes for added comfort and to ensure a proper fit.

Women's Specific Last – A lower cuff height, volume and narrower heel to accommodate women's lower leg and foot shapes.

Custom Thermo Shell – The shell can be heat molded, punched, ground and customized with your favorite boot fitter for optimized comfort and performance. The shell can be widened up to 6 mm with this process.

Flex: 90 – Stiff flex for intermediate to advanced women skiers.

LuxFit Pro Tour – Laceable, pre molded and lasted with Ultralon heat moldable foams. Features an asymmetric tongue, a medium density collar & foam package with a flex notch for increased range of motion while hiking.

Powerlite Shell – The totally new Powerlite shell is purpose-built to result in the best skiing, lightest weight boots ever produced. Made with four different stiffnesses of TPU and optimized wall thickness profiling, the Powerlite shell achieves a paradoxical balance of lightweight agility and power. The resulting boots weigh in as some of the lightest alpine boots on the market, yet they ski with all the power and drive of heavier boots.

Powerlock Spyne – A rear co-injected "Y" shaped support that adds strength and power in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.

Shell – TPU (Thermoplastic Urethane)

Cuff – TPU (Thermoplastic Urethane)

Forward Lean Adjustment – 10˚ to 17˚

Powerlock Spyne Walk Mode – Powerful and solid external walk mode with 50˚ range of cuff motion.

Friction Free Cuff Pivot – Low friction cuff pivot to ease range of motion.

4 Micro Adjustable Light Alloy

40 mm Velcro Strap

Gripwalk Outsole – ISO 9523 replaceable soles for traction and compatibility with tech and Gripwalk approved alpine bindings.

Integrated Tech Fittings

Last: 100 mm – An average last for most normal width and volume feet or slightly wider.

Custom Shell HD – Salomon's proven heat molding process makes boot fitting most feet quick and easy - the latest Custom Shell HD version is even quicker to mold than before. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direction energy transmission.

Women Calf Adjuster – Capable of adapting to different women's calf morphologies.

Flex: 90 – A medium-stiff flex for intermediate to advanced skiers.

Sense Amplifier Cuff – A new cuff design that promotes quicker rebound and better snow feel. 2 Position strap lets you select the level of power and rebound.

My Custom Fit 3D Seamless Performance Liner – Those pesky seams you feel on your little toes? They're gone in the totally new, pre-shaped and seamless S/Max and S/Pro liners and you'll be happy they're a thing of the past. Improves comfort, precision and ensures a warmer fit.

Women's Liner – Women's liner with an anatomic tongue made of highly moldable foams provides better shin and instep comfort in sensitive foot zones.

Core-Frame Construction – A thinner walled Sensitive Shell is reinforced by the Core-Frame element that runs under the midfoot from maleolus to maleolus and stiffens the shell where you drive the ski with a minimum of added weight. Delivers precise terrain feedback and maximum power transmission to the edges.

Riveted Oversize Pivot – Ensures perfect power transmission between cuff and shell.

Shell – Polyurethane with Fiberglass Coreframe Reinforcement

Cuff – Polyurethane

Forward Lean – 12.5°

4 Aluminum 3D – Choose from 3 different positions of the instep buckle for optimum in-step comfort, full customization and personalized foot hold.

35 mm Sense Strap

Alpine ISO 5355

Gripwalk ISO 9523 Soles Available Separately

Last: 100 mm – An average last for most normal width and volume feet or slightly wider.

Custom Shell HD – Salomon's proven heat molding process makes boot fitting most feet quick and easy - the latest Custom Shell HD version is even quicker to mold than before. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direction energy transmission.

Women Calf Adjuster – Capable of adapting to different women's calf morphologies.

Flex: 100 – A stiff flex suitable for advanced to expert level all-mountain skiers.

Sense Amplifier Cuff – A new cuff design that promotes quicker rebound and better snow feel. 2 Position strap lets you select the level of power and rebound.

Flex Adjuster

My Custom Fit 3D Seamless Performance Liner – Those pesky seams you feel on your little toes? They're gone in the totally new, pre-shaped and seamless S/Max and S/Pro liners and you'll be happy they're a thing of the past. Improves comfort, precision and ensures a warmer fit.

Women's Liner – Women's liner with an anatomic tongue made of highly moldable foams provides better shin and instep comfort in sensitive foot zones.

Core-Frame Construction – A thinner walled Sensitive Shell is reinforced by the Core-Frame element that runs under the midfoot from maleolus to maleolus and stiffens the shell where you drive the ski with a minimum of added weight. Delivers precise terrain feedback and maximum power transmission to the edges.

Riveted Oversize Pivot – Ensures perfect power transmission between cuff and shell.

Shell – Polyurethane with Fiberglass Coreframe Reinforcement

Cuff – Polyurethane

Forward Lean – 12.5°

4 Aluminum 3D – Choose from 3 different positions of the instep buckle for optimum in-step comfort, full customization and personalized foot hold.

180˚ 35 mm Velcro

Alpine ISO 5355

Gripwalk ISO 9523 Soles Available Separately

Last: 100 mm – Designed for average width feet with average and slightly taller insteps.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Adaptive Fit Cuff System – These boots come with a special spoiler in the back of the cuff. If you want a classic, cozy fit around the calf you can just leave the spoiler in. If you want more volume you can take the spoiler out. This makes the boot cuff slightly lower at the back, more tuliped and more open (equivalent to one cuff size larger). It's quick, easy and you don't need tools.

Women's Specific Cuff Height + Shape – Specifically designed for female skiers, this cuff features wider, more fluted calf areas and a shorter cuff height for a secure, comfortable fit.

Flex: 105 – A stiff flex designed for expert level women skiers who charge hard in a variety of conditions.

Memory Fit 3D Gold W Liner – Features Asymmetric Liner Construction with an asym tongue, toe box, collar shape and high-quality lining materials.

3M™ Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – Polyurethane

Cuff – Polyurethane

Power Shift – Forward lean can be quickly adjusted to 13°, 15° (default) or 17° as well as the flex index by +/- 10 flex points.

1 mm Offset Shell – Truer Stance

Forward Lean Angle – 15˚

3˚ Shell Rotation

6000 Series Aluminum Buckles

40 mm Velcro Strap

Dual Density ISO 5355 Cantable Grip Pads

Last: 98 mm – A narrow last for skiing precision or low volume feet.

Fast Fit Entry – Softer TPU designed into the instep area of the Powerlite shell for quick and easy entry and exit.

Asymmetrical Toe Box – Fits the natural curvature of your toes for added comfort and to ensure a proper fit.

Navicular Punch – A strategic bump built into the boot mold to alleviate pressure commonly experienced during ankle flexion.

Women's Specific Last – A lower cuff height, volume and narrower heel to accommodate women's lower leg and foot shapes.

Custom Thermo Shell – The shell can be heat molded, punched, ground and customized with your favorite boot fitter for optimized comfort and performance. The shell can be widened up to 6 mm with this process.

Flex: 110 – A very stiff flex designed for expert women skiers.

PrecisionFit Pro Tour – Laceable, pre molded and lasted with Ultralon heat moldable foams. Features an asymmetric tongue, a medium density collar & foam package with a flex notch for increased range of motion while hiking.

Powerlock Spyne – A rear co-injected "Y" shaped support that adds strength and power in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.

Powerlite Shell – The totally new Powerlite shell is purpose-built to result in the best skiing, lightest weight boots ever produced. Made with four different stiffnesses of TPU and optimized wall thickness profiling, the Powerlite shell achieves a paradoxical balance of lightweight agility and power. The resulting boots weigh in as some of the lightest alpine boots on the market, yet they ski with all the power and drive of heavier boots.

Shell – TPU (Thermoplastic Urethane)

Cuff – Pebax® Bioresin

Forward Lean Adjustment – 10˚ to 17˚

Powerlock Spyne Walk Mode – Powerful and solid external walk mode with 50˚ range of cuff motion.

Friction Free Cuff Pivot – Low friction cuff pivot to ease range of motion.

4 Micro Adjustable Light Alloy

45 mm Ripcord Power Cinch Strap – Releases in a flash for quicker transitions.

Gripwalk Outsole – ISO 9523 replaceable soles for traction and compatibility with tech and Gripwalk approved alpine bindings.

Integrated Tech Fittings

Last: 98 mm – A narrow and low volume touring last.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Size Adjuster Included

Women's Specific Cuff

Flex: 95 – Medium-stiff flex perfectly suited to strong skiers and narrow to mid-fat skis.

True Flex – This Atomic-exclusive shell material provides the same flex in a wide variety of temperatures so your boot won't feel too stiff in the winter or lose power in the spring.

Memory Fit 3D Silver W Liner with Touring Flex Zone – Features an anatomical fit and secure foot hold thanks to pre-shaped, thermo-formable ankle and heel zones.

3M Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – True Flex Polyurethane

Cuff – Polyurethane

3˚ Shell Rotation

Forward Lean – 15˚ (Default) and 17˚

Free / Lock 2.0 – 54˚ Range of Motion with 13˚ (Default) and 15˚ Adjustable Forward Lean Options. Simple, Light and Bombproof.

Frictionless Pivot – Igus polymer bearings provide completely natural movement for effortless ascents.

7000 Series Aluminum Buckles

35mm Velcro Strap

Investment Cast Tech Inserts

Skywalk GripWalk Sole

Last: 102 mm – Comfort fit designed to accommodate wider feet.

Women's Specific Cuff – The height of the cuff is significantly lower than for a unisex cuff. The tulip-shaped rear section easily accommodates a women's natural calf shape. It is less structured to take better account of female skiers' physiology.

Flex 90 – A medium-stiff flex for a combination of comfort and high-performance support.

Women's Thermo Optisensor 3D T2 Liner – OptiSensor 3D liners deliver a new level of optimized foot wrapping, comfort and support. Strategically placed materials in three-key fit zones maximize the interaction between the foot, liner, and shell. Softer ankle and instep areas increase comfort and foot wrapping. A stiffer heel cup provides superior heel lock, increasing support and control for enhanced performance. New Thinsulate™ lining increases warmth for all-day comfort. Impressive "out-of-the-box" fit with unparalleled performance.

Sensor Grid – Diagonal grid positioning improves shell wrapping while also reducing weight and increasing torsional rigidity. Resulting in enhanced power, precision and energy transmission.

Shell – Polyether

Cuff – Polyolefine

Hike Mode 2.0 – The new OPTIMIZED HIKE MODE includes a wider opening in the back of the lower shell, and a lower axis-of-rotation for optimized range-of-motion and uphill mobility (50⁰ ROM). The articulating lower shell insert and metal-on-metal locking mechanism increase rearward support while supplying maximum power transmission on descents.

Diagonal Buckles – Patented diagonally-oriented buckles provide better shell wrap and fit, and are easier to align during entry and exit. The diagonal angle pulls the foot back into the heel pocket for increased support.

4 Micro-Adjust Aluminum Buckles

Last: 100mm – Average last for average width and volume feet.

Tri-Fit Customization – Tri-Fit customization is the next level in truly personalizing ski boots. By focusing on the shell, the liner and the key hardware components, Nordica was able to create an easy to use technology that seamlessly and comfortably connects the foot with the liner and shell. The key to unlocking this technology is the Infrared Shell Customization Heating Element used in conjunction with the liner system and oven. These two technologies allow 100% customization of both the liner and boot shell only in the areas where it’s needed to achieve to the perfect fitting ski boot.

Infrared Fit Technology – Nordica created a customization technology that would work with the shell construction. An infrared lamp heats up the shell in problem areas that can later be pulled out using the Nordica Suction device. The boot won't be damaged by the heating element, and the process eliminates mistakes in customization.

Adjustable Cuff Profile (ACP) – Cuff volume can be changed in seconds to suit larger or smaller calves.

Flex: 85 – A medium-stiff flex for a wide range of intermediate to advanced skiers.

Performance Fit W with PrimaLoft®

Tri-Force Construction – A modern lightweight design with a hard PU or Triax spine and chassis is combined with a softer PU or Triax foot wrap and extra soft material over the instep. Allows for better wrapping around the foot and customization without losing rigidity.

Shell – Polyurethane

Cuff – Polyurethane

4 Micro-Adjust Aluminum Alloy

35 mm Velcro Strap

Alpine High Traction Soles

GripWalk Soles Available Separately

Weather Shield – Overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot.

Adjustable Components – 100% customizable hardware. Screwed buckles, power strap, cuff canting and alignment, soles and cuff.

Last: 100mm – Designed to fit average width and volume feet.

Tri-Fit Customization – Tri-Fit customization is the next level in truly personalizing ski boots. By focusing on the shell, the liner and the key hardware components, Nordica was able to create an easy to use technology that seamlessly and comfortably connects the foot with the liner and shell. The key to unlocking this technology is the Infrared Shell Customization Heating Element used in conjunction with the liner system and oven. These two technologies allow 100% customization of both the liner and boot shell only in the areas where it’s needed to achieve to the perfect fitting ski boot.

Infrared Fit Technology – Nordica created a customization technology that would work with the shell construction. An infrared lamp heats up the shell in problem areas that can later be pulled out using the Nordica Suction device. The boot won't be damaged by the heating element, and the process eliminates mistakes in customization.

Adjustable Cuff Profile (ACP) – Increases cuff volume to better cradle the calf. Helps create a more neutral stance that improves balance and minimizes fatigue.

Easy Entry Instep – Soft plastic flap eases entry and exit of the boot.

Flex: 115 – Very stiff, hard-charging boot for the expert skier.

3D Cork Fit W PrimaLoft® – 3D pre-shaped, heat-moldable liner with Cork Fit ankle pocket and PrimaLoft® insulation.

Tri-Force Construction – A modern lightweight design with a hard PU or Triax spine and chassis is combined with a softer PU or Triax foot wrap and extra soft material over the instep. Allows for better wrapping around the foot and customization without losing rigidity.

Shell – Polyurethane

Cuff – Polyurethane

4 Micro-Adjust Aluminum Buckles

Power Driver | 45 mm Strap – Nordica’s patented power driver creates the perfect marriage between the upper cuff and upper liner, allowing them to uniformly and efficiently work as one. It’s PU construction lends itself to being fully customizable.

High Traction ISO 5355 Double Density PU Alpine Soles

GripWalk Soles Available Separately

Adjustable Components – 100% customizable hardware. Screwed buckles, power strap, cuff canting and alignment, soles and cuff.

Weather Shield – Overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot.