Alpine Touring Boots

Last: 98 mm – A narrow last for skiing precision or low volume feet.

Fast Fit Entry – Softer TPU designed into the instep area of the Powerlite shell for quick and easy entry and exit.

Asymmetrical Toe Box – Fits the natural curvature of your toes for added comfort and to ensure a proper fit.

Navicular Punch – A strategic bump built into the boot mold to alleviate pressure commonly experienced during ankle flexion.

Women's Specific Last – A lower cuff height, volume and narrower heel to accommodate women's lower leg and foot shapes.

Custom Thermo Shell – The shell can be heat molded, punched, ground and customized with your favorite boot fitter for optimized comfort and performance. The shell can be widened up to 6 mm with this process.

Flex: 110 – A very stiff flex designed for expert women skiers.

PrecisionFit Pro Tour – Laceable, pre molded and lasted with Ultralon heat moldable foams. Features an asymmetric tongue, a medium density collar & foam package with a flex notch for increased range of motion while hiking.

Powerlock Spyne – A rear co-injected "Y" shaped support that adds strength and power in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.

Powerlite Shell – The totally new Powerlite shell is purpose-built to result in the best skiing, lightest weight boots ever produced. Made with four different stiffnesses of TPU and optimized wall thickness profiling, the Powerlite shell achieves a paradoxical balance of lightweight agility and power. The resulting boots weigh in as some of the lightest alpine boots on the market, yet they ski with all the power and drive of heavier boots.

Shell – TPU (Thermoplastic Urethane)

Cuff – Pebax® Bioresin

Forward Lean Adjustment – 10˚ to 17˚

Powerlock Spyne Walk Mode – Powerful and solid external walk mode with 50˚ range of cuff motion.

Friction Free Cuff Pivot – Low friction cuff pivot to ease range of motion.

4 Micro Adjustable Light Alloy

45 mm Ripcord Power Cinch Strap – Releases in a flash for quicker transitions.

Gripwalk Outsole – ISO 9523 replaceable soles for traction and compatibility with tech and Gripwalk approved alpine bindings.

Integrated Tech Fittings

Last: 98 mm – A narrow and low volume touring last.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Size Adjuster Included

Women's Specific Cuff

Flex: 95 – Medium-stiff flex perfectly suited to strong skiers and narrow to mid-fat skis.

True Flex – This Atomic-exclusive shell material provides the same flex in a wide variety of temperatures so your boot won't feel too stiff in the winter or lose power in the spring.

Memory Fit 3D Silver W Liner with Touring Flex Zone – Features an anatomical fit and secure foot hold thanks to pre-shaped, thermo-formable ankle and heel zones.

3M Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – True Flex Polyurethane

Cuff – Polyurethane

3˚ Shell Rotation

Forward Lean – 15˚ (Default) and 17˚

Free / Lock 2.0 – 54˚ Range of Motion with 13˚ (Default) and 15˚ Adjustable Forward Lean Options. Simple, Light and Bombproof.

Frictionless Pivot – Igus polymer bearings provide completely natural movement for effortless ascents.

7000 Series Aluminum Buckles

35mm Velcro Strap

Investment Cast Tech Inserts

Skywalk GripWalk Sole

Last: 98 mm – A narrow and low volume touring last.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Size Adjuster Included

Flex: 120 – A stiff flex designed for expert level skiers.

True Flex – This Atomic-exclusive shell material provides the same flex in a wide variety of temperatures so your boot won't feel too stiff in the winter or lose power in the spring.

Memory Fit 3D Gold Liner with Touring Flex Zone – Features an anatomical fit and secure foot hold thanks to pre-shaped, thermo-formable ankle and heel zones.

3M Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – Polyamide

Cuff – Polyurethane

3˚ Shell Rotation

Forward Lean – 15˚ (Default) and 17˚

Free / Lock 2.0 – 54˚ Range of Motion with 13˚ (Default) and 15˚ Adjustable Forward Lean Options. Simple, Light and Bombproof.

Frictionless Pivot – Igus polymer bearings provide completely natural movement for effortless ascents.

7000 Series Aluminum Buckles

50mm Cam Strap

Investment Cast Tech Inserts

Skywalk GripWalk Sole

Last: 100 mm – An average width and volume last fits most feet.

Fast Fit Entry – Softer TPU designed into the instep area of the Powerlite shell for quick and easy entry and exit.

Navicular Punch – A strategic bump built into the boot mold to alleviate pressure commonly experienced during ankle flexion.

Asymmetrical Toe Box – Fits the natural curvature of your toes for added comfort and to ensure a proper fit.

Women's Specific Last – A lower cuff height, volume and narrower heel to accommodate women's lower leg and foot shapes.

Custom Thermo Shell – The shell can be heat molded, punched, ground and customized with your favorite boot fitter for optimized comfort and performance. The shell can be widened up to 6 mm with this process.

Flex: 90 – Stiff flex for intermediate to advanced women skiers.

LuxFit Pro Tour – Laceable, pre molded and lasted with Ultralon heat moldable foams. Features an asymmetric tongue, a medium density collar & foam package with a flex notch for increased range of motion while hiking.

Powerlite Shell – The totally new Powerlite shell is purpose-built to result in the best skiing, lightest weight boots ever produced. Made with four different stiffnesses of TPU and optimized wall thickness profiling, the Powerlite shell achieves a paradoxical balance of lightweight agility and power. The resulting boots weigh in as some of the lightest alpine boots on the market, yet they ski with all the power and drive of heavier boots.

Powerlock Spyne – A rear co-injected "Y" shaped support that adds strength and power in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.

Shell – TPU (Thermoplastic Urethane)

Cuff – TPU (Thermoplastic Urethane)

Forward Lean Adjustment – 10˚ to 17˚

Powerlock Spyne Walk Mode – Powerful and solid external walk mode with 50˚ range of cuff motion.

Friction Free Cuff Pivot – Low friction cuff pivot to ease range of motion.

4 Micro Adjustable Light Alloy

40 mm Velcro Strap

Gripwalk Outsole – ISO 9523 replaceable soles for traction and compatibility with tech and Gripwalk approved alpine bindings.

Integrated Tech Fittings