Men's Alpine Boots

Last: 100 mm – An average width and volume last fits most feet.

Fast Fit Entry – Softer TPU designed into the instep area of the Powerlite shell for quick and easy entry and exit.

Fully Heat Moldable

Flex: 100 – Medium flex for lighter and less aggressive skiers

LuxFit Pro Tour – Laceable, pre molded and lasted with Ultralon heat moldable foams. Features an asymmetric tongue, a medium density collar & foam package with a flex notch for increased range of motion while hiking.

PowerLite Shell – The shell is purpose-built to result in the best skiing, lightest weight boots ever produced. Made with four different stiffnesses of TPU and optimized wall thickness profiling, the Powerlite Shell achieves a paradoxical balance of lightweight agility and power. The resulting boots weigh in as some of the lightest alpine and freeride on the market, yet they ski with all the power and drive of heavier boots.

Powerlock Spyne – A rear co-injected "Y" shaped support that adds strength and power in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.

Shell and Cuff – TPU

Adjustable Forward Lean – 10˚ - 17˚

Powerlock Spyne Walk Mode – Powerful and solid external walk mode with 50˚ range of cuff motion.

Friction Free Cuff Pivot – Low friction cuff pivot to ease range of motion.

4 Micro Adjustable Light Alloy

40mm Velcro Power Strap

Gripwalk Outsole – ISO 9523 replaceable soles for traction and compatibility with tech and Gripwalk approved alpine bindings.

Integrated Tech Fittings – Fully integrated into the shell injection, instead of just outsole pods, compatible with both DIN alpine and tech bindings.

Last: 100mm – Average last for average width and volume feet.

Tri-Fit Technology – Tri-Fit customization is the next level in truly personalizing ski boots. The key to unlocking this is Infrared Fit Technology used in conjunction with the liner system and oven. These technologies allow 100% customization of both the liner and boot shell only in the areas where it’s needed to achieve to the perfect fitting ski boot.

Infrared Fit Technology – Customization technology that uses an infrared lamp to heat up problem areas at the perfect temperature for modification by a bootfitter. The boot won't be damaged by the heating element, and the process eliminates mistakes in customization

Last: 100 mm – Designed for average width feet with average and slightly taller insteps.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Flex: 130 – A very stiff flex for maximum power and response, suitable for very fast and aggressive skiers.

True Flex – Atomic's unique True Flex additive helps PU and Grilamid shells maintain a consistent flex and feel in a wide variety of temperatures.

Memory Fit 3D Platinum Liner – Features Asymmetric Liner Construction with an asym tongue, toe box, collar shape and high-quality lining materials.

3M™ Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – Polyurethane

Cuff – Polyurethane

Power Shift – Forward lean can be quickly adjusted to 13°, 15° (default) or 17° as well as the flex index by +/- 10 flex points.

1 mm Offset Shell – Truer Stance

Forward Lean Angle – 15˚

3˚ Shell Rotation

6000 Series Aluminum Buckles

50 mm Velcro Strap

Dual Density ISO 5355 Cantable Grip Pads

Last: 100 mm – Designed for average width feet with average and slightly taller insteps.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Adaptive Fit Cuff System – These boots come with a special spoiler in the back of the cuff. If you want a classic, cozy fit around the calf you can just leave the spoiler in. If you want more volume you can take the spoiler out. This makes the boot cuff slightly lower at the back, more tuliped and more open (equivalent to one cuff size larger). It's quick, easy and you don't need tools.

Flex: 130 – A very stiff flex for maximum power and response, suitable for very fast and aggressive skiers.

True Flex – This Atomic-exclusive shell material provides the same flex in a wide variety of temperatures so your boot won't feel too stiff in the winter or lose power in the spring.

Mimic Platinum Liner with Touring Flex Zone – This is a boot that feels right from the very start. The heel, ankle, and tongue feature a layer of supportive, heat-moldable material. After being softened in the oven, this material mimics the precise shape of your foot and hardens for a perfect custom fit.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – Polyamide

Cuff – Polyamide

Forward Lean – 13˚ / 15˚ (Default) / 17˚

Free / Lock 4.0 – 54˚ Range of Motion with 13˚ (Default) and 15˚ Adjustable Forward Lean Options. Simple, Light and Bombproof.

Frictionless Pivot – Igus polymer bearings provide completely natural movement for effortless ascents.

6000 Series Aluminum Buckles

50mm Cam Strap

Tech GripWalk Pads

Investment Cast Tech Inserts

Last: 102mm – Medium wide last for wider than average or higher volume feet.

Instep Volume Control – Adjust the volume of your boot quickly and easily with a hinged double level volume wedge attached to the boot board. Flip it underneath the boot board for an additional 4mm instep height.

Infrared Fit Technology – Customization technology that uses an infrared lamp to heat up problem areas at the perfect temperature for modification by a bootfitter. The boot won't be damaged by the heating element, and the process eliminates mistakes in customization.

Last: 100mm – Average last for average width and volume feet.

Tri-Fit Technology – Tri-Fit customization is the next level in truly personalizing ski boots. The key to unlocking this is Infrared Fit Technology used in conjunction with the liner system and oven. These technologies allow 100% customization of both the liner and boot shell only in the areas where it’s needed to achieve to the perfect fitting ski boot.

Infrared Fit Technology – Customization technology that uses an infrared lamp to heat up problem areas at the perfect temperature for modification by a bootfitter. The boot won't be damaged by the heating element, and the process eliminates mistakes in customization.

Last: 98mm – A low volume last for narrow feet and those seeking maximum response.

Tri-Fit Technology – Tri-Fit customization is the next level in truly personalizing ski boots. The key to unlocking this is Infrared Fit Technology used in conjunction with the liner system and oven. These technologies allow 100% customization of both the liner and boot shell only in the areas where it’s needed to achieve to the perfect fitting ski boot.

Infrared Fit Technology – Customization technology that uses an infrared lamp to heat up problem areas at the perfect temperature for modification by a bootfitter. The boot won't be damaged by the heating element, and the process eliminates mistakes in customization.

Last: 98 mm – Narrower than average last with 7% less volume than Tecnica's MV (Medium Volume) fit.

C.A.S. Shell – Custom Adaptive Shape shells are anatomically formed around the heel and problem areas at the factory. Common punch zones are plainly marked with a dot grid pattern on the shell, and the new polyether and Triax 3.0 shell materials offer improved stability when heated.

C.A.S. Grindable Boot Board – The removable C.A.S. boot board offers plenty of thickness for grinding and a grid pattern for reference.

Quick Instep – A shaped plastic component at the instep that is softer than the rest of the shell helps you to step into and out of the ski boot.

Flex: 120 – A stiff flex for expert or heavier skiers who require quick rebound and ski response.

C.A.S. Ultrafit Pro Liner – Thin and responsive pre-formed liner offers superior performance and fit. Uses a microcell material that is pre-shaped to the anatomy of the foot. The microcell is also easy to customize and has a low pack-out rate over time.

Shell – Polyester

Cuff – Polyester + Rear Spine Fiber Glass Insert

Double Oversize Alignment

12˚ Forward Lean

3.8˚ Ramp Angle

4 Micro Alu Buckles + Catches with Lift Lock

Lift Lock Buckles – The lift lock system makes your life easier by automatically keeping the buckles open while you step in and out of the boots.

45 mm Power Strap

C.A.S. Footbed

Bi-Material ISO 5355 Alpine Soles

Last: 98 mm – A narrow last suitable for those with narrower than average feet (heat customizable to fit many average width feet).

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Size Adjuster Included

Flex: 120 – A stiff flex for great power and response, suitable for fast and aggressive skiers.

True Flex – Atomic's unique True Flex additive helps PU and Grilamid shells maintain a consistent flex and feel in a wide variety of temperatures.

Memory Fit 3D Platinum Liner – Features Asymmetric Liner Construction with an asym tongue, toe box, collar shape and high-quality lining materials.

3M™ Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – True Flex Polyurethane

Cuff – Polyurethane

Power Shift – Forward lean can be quickly adjusted to 13°, 15° (default) or 17° as well as the flex index by +/- 10 flex points.

1 mm Offset Shell – Truer Stance

Forward Lean Angle – 15˚

3˚ Shell Rotation

Liner Spoiler

6000 Series Aluminum Buckles

50 mm Velcro Strap

Dual Density ISO 5355 Cantable Grip Pads

2nd Power Shift Screw

13° Power Shift Shim

Last: 98 mm – A narrow and low volume touring last.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Size Adjuster Included

Flex: 120 – A stiff flex designed for expert level skiers.

True Flex – This Atomic-exclusive shell material provides the same flex in a wide variety of temperatures so your boot won't feel too stiff in the winter or lose power in the spring.

Memory Fit 3D Gold Liner with Touring Flex Zone – Features an anatomical fit and secure foot hold thanks to pre-shaped, thermo-formable ankle and heel zones.

3M Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – Polyamide

Cuff – Polyurethane

3˚ Shell Rotation

Forward Lean – 15˚ (Default) and 17˚

Free / Lock 2.0 – 54˚ Range of Motion with 13˚ (Default) and 15˚ Adjustable Forward Lean Options. Simple, Light and Bombproof.

Frictionless Pivot – Igus polymer bearings provide completely natural movement for effortless ascents.

7000 Series Aluminum Buckles

50mm Cam Strap

Investment Cast Tech Inserts

Skywalk GripWalk Sole